Ask or search something about android

[b]WARNING[/b]64GB SDCard & Encryption Don't Play Well Together


Friday 16th of November 2012 / forums.androidcentral.com
I was recently trying to help someone out that had questions about encrypting the SDCard, and have come to the conclusion that Samsung did not test this feature appropriately. It's certainly possible that what happened to me was an isolated incident, or some fault of my own, but based on my testing I don't think that's the case. Scenario: I have a SanDisk 64GB UHS 1 SDCard that's been working fine since July. I originally formatted it in the phone (which causes it to be formatted as exfat)I followed the process to enable encryption on the SDCard and during the actual encryption process I received an error: 'SD card blank or has unsupported filesystem.'So I turned off encryption and received the (well known) "SD card damaged. You may have to reformat it." error.All attempts to reformat the SDCard in the phone have been unsuccessful - the card either doesn't show up at all (so it can't be mounted) or it just shows the same "Damaged SD card" message. So, I shut down the phone and put the SDCard in an adapter connected to my PC. Attempts to clean/repartition/reformat
posted on: Samsung Galaxy S3
read more

cyanogenmod - How to boot the Mele A1000 in recovery mode


Saturday 30th of March 2013 / android.stackexchange.com
I installed CWM on my Mele A1000 and I was able to reboot into recovery modeusing adb.At which point I got the CWM menu where I was able to install files from SD, wipe cache etc...After installing all the files (Cyanogen) I rebooted, now when the device starts all I see is the Cyanogen splash screen for a few minutes and then a message indicating: Encryption Unsuccessful. Encryption was interrupted and can't complete. As a result the data on your tablet is no longer accessible. To resume using your tablet, you must perform a factory reset. When you set up your tablet after the reset ....This message looks like it's part of the standard Android system.Since CWM is installed I should be able to access it in order to install somethingelse,but I cannot figure out how to reboot in recovery/cwm mode. There is no hardware button other than the power button on the Mele A1000
posted on: clockworkmod
read more

Android 4.0: Encryption Unsuccessful


Sunday 23rd of December 2012 / androidforums.com
Never saw this one before. One of my tablets started freezing where I had to hold down power until it rebooted. Shortly after it came up with this screen with a hard reset button and basically told me I HAD to factory reset it. Crying out 'BS!' I held down power again until it rebooted again only this time I got the Android robot with red triangle Icon like no OS was installed. Then I got frustrated and threw the tablet onto the floor assuming since it was bricked I might as well break it. Well it didnt break and started booting normally again but now my apps are all gone as if i just opened the box. I managed to get them installed again but how did this happen in the first place? I never enabled any encryption! I'm afraid to reboot it again and while it currently works (better in fact it runs faster) the thing is unstable and the lower half of the screen responds oddly probably from my abuse
posted on: Android Lounge
read more

Pantech Burst stuck on power on loop.


Wednesday 01st of May 2013 / justanswer.com
Pantech Burst stuck on power on loop. Then message says encryption unsuccessful.E:failed to mount /data (Invalid argument)E:Can't mount/data/fota/ipth-muc.propOptional Information: What have you tried so far?: soft reset first. hard reset. tried to wipe data to factory reset.
posted on: Android Devices
read more

Broken, help


Tuesday 23rd of April 2013 / droidforums.net
Ota'ed to JB. Regained root, and made sure it was working. Sucessfully installed CWM recovery. Flashed de-ox file and wiped cashe and delvik like it said. It boots and says encryption unsuccessful, factory data reset required and wont let me do anything... I also cant get into recovery and FXZ fails... Any ideas?I just looked again and in infinite wisdom I missed that part where it said do not use bootstrap. I was reading the instructions for the ICS version so I failed. But now I need help to get it back...
posted on: Motorola Droid Bionic
read more

Serious problem, keeping it simple.


Saturday 30th of March 2013 / forums.androidcentral.com
Ok so just updated my maxx to jellybean, then decided to to root. Everything went smoothly so far. Then, I installed "cwm touch" (worked fine) then went ahead and performed a backup. The backup ran and after the phone attempted to boot it comes up "encryption unsuccessful,must perform FDR." I press the reset phone button and it goes to the loading screen and after rebooting I end up back at "encryption unsuccessful" please help!
posted on: Motorola Droid Bionic
read more

D2Pad and MOMO9 Firmware


Saturday 03rd of November 2012 / androidtablets.net
I've been playing around with my D2pad for about two weeks.So far I've tried the CM9, CM10, AOKP roms none of them seem to workCM9 & AOKP boot but the screen orientation seems to be flipped and both stopwith Encryption Unsuccessful and I am unable to get back into recovery requires reflash with livesuitI get ADB output but nothing I do seems to get me passed the Encryption Unsuccessful screen or back into recoveryincluding trying to reinstall CWR CM10 hangs at the boot animation I get adb output most errors seem to be related to not finding information on /dataDavilkVM seems to be looking for its files there, and no root access from adb The one thing I did find so far is that MOMO9 livesuit images seem to work currently running 2.3.4 image for the MOMO9Enhancedwith the filename M9_23TNT4.img all hardware seems to be working wifi except the vol-, vol+ buttons and camera app FCs.Vol- brings up application menus and vol+ doesn't seem to do anything.About Device under 2.3.4 is Model numberGT-I1900Android Version 2.3.4Baseband Version2.05Kernel Version2.6.36-androidinet_hxi@InetSoftwa
posted on: Allwinner A10 Based
read more

Onda V972 data encryption


Tuesday 11th of June 2013 / androidtablets.net
I recently purchased an Onda V972 v1 (A31 processor), which I upgraded to Android 4.2. While everything works perfectly, there are a couple of thinks I can't find;Firstly, the option to encrypt the data stored on the tablet (in most Android devices I used that was found under Settings/security).Secondly, I can't find the option to automatically wipe clean the tablet after a number of unsuccessful password attempts (which is also a part of Android 3 and later if not mistaken).Does anybody know if these two functions were intentionally omitted by the manufacturer of the specific tablet? Or is there any way (or third party program) to enable them?
posted on: Android Tablet Q&A
read more

Maxx HD Encryption Unsuccesful


Saturday 14th of December 2013 / androidforums.com
Earlier today I was using my phone, and it rebooted on me. When it came back on, it brought up the encryption unsuccessful error. I've searched the internet for a while looking for a fix for it, but couldn't find one. Running on Jellybean, not rooted. Was finally resigned to doing a reset, but when I hit the button nothing happens, it just lets me continuously hit it. Any help would be greatly appreciated. Was thinking of taking it to the Verizon store, but I'm not sure if they're open on Sunday or if they'd be able to help.
posted on: Android Tablet Q&A
read more

encryption unsuccessful


Thursday 26th of December 2013 / androidforums.com
how do I fix my phone encryption unsuccessful
posted on: Android Tablet Q&A
read more
androidbeing.com 2013